-
Details
-
-
Hits: 189071
|
|
Food and Nutrition Research Institute (FNRI)
Website: http://www.fnri.dost.gov.ph
|
- Food Analytical Testing Services
 
- Food Analytical Service Laboratory (FASL)
- Chemical Analysis
- Nutrient / Nutrition Labeling (Moisture, Crude Fat, Crude Protein, Ash, Total Carbohydrate, Energy
Total Dietary Fiber, Sugars, Calcium, Iron, Iodine, Sodium, Potassium, Vitamin C/Ascorbic Acid, Vitamin A, B-Carotene, Cholesterol, Fatty Acids (saturated/unsaturated))
- Toxicants / Contaminants (Arsenic, Mercury, Cadmium, Lead)
- Physico-Chemical Analysis
- pH; Titratable Acidity (TA); Peroxide value (PV) (oil); Free Fatty Acids (oil); Color; Viscosity; Water activity (Aw)
- Microbiological Analysis
- Food (Aerobic Plate Count (APC);Yeast and Mold Count; Coliform Count;Escherichia Coli Detection/Count;Bacillus aureus Count;Salmonella sp. Detection;Staphylococcus aureus Count;Listeria monocytogenes Detection; Commercial sterility)
- WATER (Heterotrophic Plate Count; Total Coliform Count; Fecal Coliform Count; Escherichia coli Count)
- Nutrient Bioavailability Laboratory
- Physiological Testing
- Glycemic Index/Glycemic Response of Foods
- In Vitro Mineral (Iron, Calcium, Zinc) Availability in Foods and Meals
- Efficacy studies on the nutritional and health benefits of functional foods
- Body composition using bio-impedance
- Food Proficiency Testing Laboratory
- Proficiency Test Scheme on Wheat Flour
- Proficiency Test Scheme on Snack Foods
- Available Test Materials for Quality Control and Method Validation (Infant Formula, Milk Powder)
- Biochemical Assesment Service Laboratory
- Plasma/Serum Vitamin A; Method: Spectrophotometric using HPLC
- Urinary Iodine Excretion (UIE); Method: Sandell-Kolthoff Method
- Hemoglobin; Method: Cyanmethemoglobin
- Serum/Plasma Ferritin; Method: Radioimmunoassay (RIA)
- Serum/RBC Folate; Method: Radioimmunoassay (RIA)
- Serum Zinc; Method: Atomic Absorption Spectrometry (AAS)
- Nutrition Food Processing Services
- Biochemical Testing
- Serum vitamin A & Urinary Iodine Excretion
- Physiological Testing
- In Vitro Mineral Availability
- Urinary Calcium
- Glycemic Index
- Body Composition using BIA/Stable Isotope
- In Vivo Mineral Absorption Using Radio/Stable Isotopes
- Antioxidant Capacity
|
|
|
Industrial Technology Development Institute (ITDI)
Website: http://www.itdi.dost.gov.ph
|
- Tests and Analyses
- Tests and Analyses of Materials and Products
- Evaluation of Formula of Conversion for Duty Drawback/Tax Credit Purposes
- Advisory and Consultancy Services
- CHEMICAL AND ENERGY
- Use of Stamping Machine
- Preparation and Grinding of 3kg plant materials
- Use of Bomb Calorimeter/Heating Value Analysis
- Concentration of 3-Liters Plant Extract
- Production of Herbal Soap with Plant Extract
- Use of Centrifugal Particle Size Analyzer (1 sample)
- Use of Centrifugal Particle Size Analyzer (2 samples)
- Preparation of 250 grams cream with 3% Plant Extract
- Preparation of Concentrated Crude Plant Extract from 500grams Fresh Extract/300grams powdered sampl
- Distillation of Ethanol from Biomass (1 Liter)
- Extraction of Essential Oil from 3kg Plant Materials
- Extraction of Essential Oil from 50kg Plant Materials
- Distillation of CME, 90% Recovery
- Extraction of Chitin
- Analysis/Evaluation of Essential Oil for Physico-Chemical Analysis
- Use of UV-VIS Analyzer (per sample)
- Extraction of Fixed Oil from 1kg Plant Material
- Esterification of Fixed Oil
- Processing of 1kg Semi-Refined Carageenan from 5kg Dried Eucheuma Species
- Extraction and Phyto-Chemical Analysis
- Analysis of Glycerine, % Mass (maximum) for Biodiesel
- Extraction and Formulation of 1-Liter Shampoo from Plant Extract
- Extraction and Formulation of 250g Cream with Plant Extract
- Extraction of Pectin
- Proximate Analysis (Moisture, Volatile Matter, Ash and Fixed Carbon) for Coke, Coal and its Derivatives (1 sample)
- Use of System Gas Chromatography Equipment for Natural Gas Analysis (1 sample)
- Extraction and Esterification of Oil (1kg)
- Processing of 1kg Agar from 5kg of Dried Gracilaria Species
- ENVIRONMENT AND BIOTECHNOLOGY
- Cleaner Production Assessment
- Environmental Technology Verification
- Policy Advice
- FOOD PROCESSING
- Thermal Processing Studies
- Heat Penetration test on canned and bottled products to establish appropriate time and temperature combination to achieve commercial sterility
- Adequacy of existing process
- Heat Distribution Tests for retorts and Corrective action
- Sterility Test
- Food Analysis
- Physico-Chemical Analyses
- Microbiological Analyses
- Pilot Plant Set-up, Production Scale-up and Product/Production Costing
- Shelf-life Testing
- MATERIAL SCIENCE
- ceramic/plastics production: basic technique
- use/operation of analytical instruments, processing equipment, kilns/furnaces
- PACKAGING TECHNOLOGY
- Package Development (Inclusive of shelf-life testing, label design)
- Shelf-life Testing (Low acid canned foods; High acid foods; Dried foods; Perishables; Frozen foods)
- Technical Supervision/Evaluation for In-Plant Production
- Transport Packaging (Evaluation of Packaging for Transport; Compression testing; Packaging Design for Transport Pkg. w/ Cushion Design)
- Label Design (Without Concept Development; With Concept Development; Label Design for Box)
- Nutrition Labeling (Analysis Depends on Product Ingredient; Evaluation Only)
- Use of Facilities (Vacuum Packaging Machine; Form-Fill-Seal for Solids; Continuous Band Sealer; Skin Packaging Machine; Shrink Packaging Machine; Sacheting Machine; Hot & Cold Sealer; Retort Rental; Preparation Room Rental)
- Testing
- Water Vapor Transmission Rate
- Determination of tolerance/ethyl acetate residual in printed packaging material
- Migration Testing Film
- Migration Testing Finished Packages; Identification of Plastic Using DSC
- Determination of Oxygen Transmission Rate
- Tensile & Peel Test Using UTM)
- STANDARDS AND TESTING
- Biological Laboratory (Microbiological Testing)
- Tests on veterinary, pharmaceutical and biological products
- Efficacy tests on biocides
- Tests on cosmetics, perfumes and essential oils
- Microbiological tests on foods and beverages
- Microbiological tests on packaging materials
- Microbiological tests on non-food/non-pharmaceutical products
- Microbial test of waters, including effluents
- Chemistry Laboratory (Chemical Testing)
- Inorganic Chemistry (Waters; Miscellaneous materials and products)
- Organic Chemistry (Foods; Agricultural Products and Materials)
- Physical and Performance Testing Laboratory (Mechanical Testing)
- Rubber and Rubber Products
- Plastics and Plastic Products
- ADVANCED DEVICE AND MATERIALS TESTING LABORATORY (ADMATEL)
- AUGER ELECTRON SPECTROSCOPE (AES)
- Depth profile analysis
- Spectrum Measurement
- Surface map analysis
- Line analysis measurement
- Element identification (<1 atomic percentage)
- Imaging of part analysis (at magnification x 200k)
- DIFFERENTIAL SCANNING CALORIMETER (DSC)
- Thermal Stability
- Melting Point
- Heat of Fusion
- Degree of Crystallinity
- Traditional materials characterization research
- Routine quality assurance and goods-in testing
- Oxide induction Testing (OIT)
- Multi-user, ad-hoc DSC analysis
- FOCUSED ION BEAM-FIELD EMISSION SCANNING ELECTRON MICROSCOPE (FIB-FESEM)
- Defect Analysis
- Failure Analysis
- TEM Lamella Preparation
- Prototyping for MEMS and NEMS
- Metrology at Nano scale
- Site Specific Sample Preparation
- STEM Analysis
- EDS Analysis
- Cross sectioning
- Device Modification
- THERMOGRAVIMETRY / DIFFERENTIAL THERMAL ANALYZER (TG/DTA)
- SIMULTANEOUS THERMAL ANALYZER
- THERMO-MECHANICAL ANALYZER (TMA)
- Glass Transition Temperature of Organic Films - TMA Method
- Glass Transition Temperature and z-Axis Thermal Expansion by TMA
- Glass Transition Temperature and Thermal Expansion of Materials Used in High density Interconnection (HDI) and Microvias - TMA Method
- TIME-OF-FLIGHT SECONDARY ION MASS SPECTROMETER ( TOF-SIMS)
- Trace Metal Detection / Quantification
- Simultaneous detection of all elements (ppm/ppb range), in depth distribution, backside contaminants
- Screening for Contaminants
- Inorganic and organic, Particle analysis
- Gate Oxide analysis
- Ultra-thin dielectric layers, Nitrogen content, Oxide thickness
- Analysis of Shallow Implants
- Parallel mass detection ( contaminant screening)
- Failure Analysis
- Interface, Bond pad, Test pad analysis, Defect and particle analysis
- Metrology
- NANATIONAL METROLOGY LABORATORY (NML) OF THE PHILIPPINES
- Calibration and Testing
- Mass Standards
- Pressure Standards
- Force Standards
- Length Standards
- Density and Volume Standards
- Thermometry (TC and Hygrometry) Standards
- Photometry Standards
- Electrical Standards
- Big Volume and Fow Standards Section
- Proficiency Testing Service
- Process Engineering
- Post Harvest Handling/ Near Farm Processing/ Packaging
- Packaging Research and Development
- Cleaner Production (CP)
- Enterprise Module (EM)
- Energy Audit
|
{tab S&T Service Institutes|orange}
